Advanced Concepts is pleased to serve our friends and neighbors in Highlands Ranch and the surrounding communities. You will be totally satisfied when you hire our fully insured, licensed, and bonded deck building service and general contracting company. We employ only the most trustworthy, dependable, and experienced people because we believe our customers deserve the very best. We take delight in every project we’ve completed over the years and embrace any opportunity to exceed our customers’ loftiest goals. We would be delighted to engage in a detailed discussion about your specific needs and showcase precisely what our highly skilled team can accomplish for you!
- Inspection – When you choose Advanced Concepts for your deck repair, we’ll first inspect the deck and determine which repairs are necessary. We’ll get the job done quickly and exceed our own rigorous workmanship standards, whether you need a full deck replacement or a simple repair. If we discover that your deck could benefit from a repair, we’ll have it back in working order in no time.
- Remove Nails & Screws – To begin the repair procedure, we will start by taking out the fasteners. Our approach will vary based on the scope of the repair and the specific issue we are dealing with. In the case of minor repairs, we may only extract a few screws, while more intricate tasks could necessitate the disassembly of a substantial section of the deck.
- Inspect Joists & Remove Rotten Areas – In the event that your joists exhibit signs of damage or rot, our next step will be to either repair or replace them.
- Replace & Reinforce Joists – Under certain conditions, restoring structural stability calls for the addition of another joist. Alternatively, a damaged joist can either undergo repair or replacement. To successfully replace a joist, it’s imperative to ensure robust support and bracing for the surrounding framework. This can prove to be a complex and meticulous endeavor demanding professional expertise. The advantage lies in our comprehensive understanding of Highlands Ranch decks, uniquely positioning us to handle this task.
- Prepare Replacement Deck Board(s) – We’ll cut and fit any replacement boards from carefully-matched lumber, then stain or weather it to match the rest of the deck.
- Install New Decking – With meticulous attention to detail, we will install the replacement deck boards, ensuring that spacing, finish, color, and even screws or nails perfectly match your current decking. This will leave you with a beautifully restored and repaired deck, fully prepared for your enjoyment.
Considered platforms or floating decks, this deck type excels at creating intimate seating spaces within your outdoor space. Detached decks earn their name by not being affixed to permanent structures and instead standing independently next to them, usually linked only by a connecting path. Detached decks do necessitate periodic upkeep, call for a patio or walkway for accessibility, and can be slightly more vulnerable to moisture-related damage compared to elevated variants. Yet, these adaptable decks shine on uneven terrains, prove to be a more budget-friendly alternative than attached designs, and typically do not demand the hassle of building permits.
When you’re exploring options for decks in Highlands Ranch, attached decks should be at the forefront of your choices if your main goal is to seamlessly blend your outdoor and indoor living spaces. This deck style is the most common and is meticulously designed to complement a specific area within your home, like your living room, ensuring a smooth transition between the deck and the adjacent room. Attached decks come in various varieties, whether they’re standard single-level structures or multi-level designs. They are primarily characterized by the ledger board securely fastened to your home’s framework, imparting unmatched stability and strength. Support posts and footings beneath further enhance their structural integrity. They are an exceptional way to expand and optimize your indoor living spaces, creating a clever and practical outdoor area that could potentially elevate your property’s overall value. It’s important to bear in mind, though, that they require inspections, building code adherence, and permits, and if they see frequent use, regular maintenance may be a necessity.
For residences boasting expansive outdoor living areas that seamlessly join several sides of the structure, this deck design is a top-notch choice. These generous attached decks are commonly perched at a slight elevation, encircling a minimum of two sides of the residence. Their popularity stems from their function as extensions of your living space, augmenting the circulation of indoor air, and providing the freedom to relish either sunlight or shade as you prefer. Nonetheless, they typically have a narrower profile compared to traditional attached decks, potentially resulting in increased installation time and costs. Furthermore, expenses may rise if you choose to outfit them with roofing.
This deck type suits large properties with notable changes in elevation exceptionally well. Multi-level decks essentially feature multiple decks positioned at different heights, linked together by staircases. Given that constructing on existing landscapes proves more cost-effective than leveling the land, this deck style is the perfect choice for homes situated on rugged, sloping, or hilly terrains. Depending on the unique design we create for you, these decks can either be fully integrated with the house or encompass a combination of attached and detached sections. Multi-level decks tend to be among the pricier design options as they require a greater quantity of decking materials and call for periodic maintenance. Nevertheless, they can be developed in phases and offer additional living space that might otherwise remain unattainable.
- Choose a design. When you’re ready to enhance your home with deck installation, it’s essential to carefully consider your design options. Take into account things like your budget, objectives, your home’s architecture and elevation, existing outdoor features, and your stylistic preferences. Your professional deck installers at Advanced Concepts can assist you with this vital process with their extensive experience and expertise.
- Choose the ideal material. Explore the diversity of decking materials, each with distinct maintenance needs, price points, and aesthetics. Some materials may even add substantial value to your property. Collaborate with your deck builder to determine the material that aligns best with your preferences and requirements. The spectrum of choices, spanning from PVC to pressure-treated wood, composite, premium hardwoods, and more, can be abundant. But don’t worry – your local deck supplier is available to assist you through the selection process!
- Begin construction. This process will begin with careful measuring, excavation of footings, and installation of the ledger. These preliminary stages may appear tedious, but your deck contractors in Highlands Ranch regard them with the utmost importance because they lay the framework for a robust, well-built deck that will last for many years. The ledger board is immediately joined to the home’s framework, and the footings are set into holes (which must be driven to extremely specified depths).
- Build and install the deck framing. The installation of the joists forms the basis for your upcoming deck. Our team of expert deck builders will utilize corrosion-resistant fasteners to securely attach the joists to the support beams and ledger boards.
- Install the decking boards. During this process, your deck contractors will lay the decking and connect it to the joists, bringing the deck to life. Deck companies can install decking using bracket systems that eliminate the need to drive nails through the face of the decking boards, or we can take the more traditional route.
- Build stairs and railings. Unless your particular deck design mandated the installation of stairs before attaching decking boards (which can be the case for certain deck styles or decks of particular heights), your deck builder in Highlands Ranch will finalize the installation by crafting railings and stairs that harmonize with the quality and elegance of your stunning new deck. Constructing railings and stairs can be a challenging endeavor, but our proficient deck contractors are well-prepared for the job.
Oil-based stains are lower-maintenance than alternatives because they contain linseed, tung, soy, or other oils. Because of their proclivity for mold growth, they must be used in conjunction with mold-resistant treatments – but they cling to the wood beautifully. Oil-based stains typically require reapplication after a year or two, but the surface only needs to be cleaned before reapplication – no sanding or stripping is required.
Solid stains completely mask the natural patterns and hues of the wood, providing exceptional UV protection. They resemble a paint-like layer that uniformly coats the wood’s surface. The maintenance frequency depends on the level of pigmentation, requiring more attention with denser pigments and involving a comprehensive process of sanding, stripping, and re-staining for re-application. Solid stains are more prone to blistering, peeling, and cracking compared to other stain types. Nevertheless, they excel at concealing flaws, are easily cleaned, resistant to moisture, and present a vast spectrum of color choices.
Semi-transparent stains provide a protective, clear coating that allows the natural beauty and wood color to shine through. These stains come in a wide range of pigment colors, and they are renowned for their remarkable, low-maintenance qualities. They usually offer the convenience of straightforward cleaning and re-coating without the need for arduous stripping or sanding.
Epoxy-fortified stains are a modern, water-based option that uses a bit of epoxy combined with synthetic resin for the purpose of improving the color retention, durability, and longevity of the stain. These formulations incorporate specific chemicals that facilitate deep wood penetration and create a lustrous sheen reminiscent of traditional stains. While it’s necessary to remove previous stains before reapplication, the unique benefit of epoxy-enhanced stains lies in their reduced need for frequent reapplication.
Semi-solid stains obscure the wood’s color and texture to a significant degree. They provide superior UV protection compared to semi-transparent or transparent stains, and their color consistency simplifies the selection process.
Water-based stain does not normally penetrate wood completely, although it can be surprisingly long-lasting. It persists longer than oil-based stain (approximately 2 to 3 years), but stripping and re-applying can be time-consuming because the old stain must be completely removed first.
Transparent stains provide an opportunity to savor the wood’s natural hues and inherent qualities without any modification or concealment. Transparent stains don’t cover the wood and, instead, they penetrate the grain – which means they are less slippery than their solid counterparts. While they require more frequent reapplication than darker stains and can’t conceal flaws, they still offer advantages such as resistance to rot, moisture, and UV rays, along with protection against weather-related damage.
When you’re in the process of choosing a deck style, it’s crucial to consider:
- Do you reside in a HOA that might require clearance before we start building the deck?
- Are there any local constraints regarding the design or dimensions of decks?
We’ll handle these administrative tasks before starting the construction of your incredible new deck.
- What are the particular objectives you aim to achieve with the deck – increasing property value, expanding your indoor living space, or something else entirely?
- Which type of deck (attached or detached) do you think best aligns with your requirements in terms of both functionality and appearance?
- How should your deck be designed to complement your lifestyle?
Thinking about these things will help you choose the appropriate deck style and design.
- How much foot traffic will pass across the deck?
- What is the local weather like, and what climatic problems will the deck have to face?
- Will the deck receive direct exposure to sunlight?
These elements will assist with determining the ideal material for your deck.
- Are you captivated by the enduring charm and aesthetic of wood? Would you prefer the cost-effectiveness and beauty of softwoods (like pine, cedar, or redwood), or the performance of hardwoods (such as maple, oak, walnut, or mahogany)?
- Are you in the market for a material that’s exceptionally durable, high-performing, and built to last, like aluminum?
- Do you prioritize cost-effectiveness, toughness, and the natural appearance of pressure-treated wood?
- Do you place importance on sustainability, minimal upkeep, and composite’s high performance?
- Do you love the look of real wood, but want a higher-performance, lower-maintenance alternative like vinyl or PVC?
Choose the proper material with the help of your trusted decking professional.